Crown DCi4|1250DA

Overview

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

INTEGRATED DANTE™NETWORKED AUDIO – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.

NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

LevelMAX Limiters

Input/Output EQ

Crossover

Delay

Matrix Router

Speaker Line Monitoring

Recommended for: Installed Sound.

Specifications

Redundant Dante ports
- Primary
- Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
Audio Architect Control and Monitoring
DriveCore Amplifier Technology
Universal PFC Power Supply
DSP
- 48kHz processing
- 20 Presets
- Input router
High, medium, and low priority inputs
- Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring
Pilot tone
- Normal
- Burst
Continuous Load Monitoring
Sweep Load Monitoring
- Channel Auto-Standby
- Speaker Tunings
Aux-Port
- Sleep contact closure
- Amp Status output
Removable air filters
Front panel LED indicators
POWER SPECIFICATIONS
Dual-Mode - All Channels Driven
- 2Ω: 1250W
- 4Ω: 1250W
- 8Ω: 1250W
- 16Ω: 625W
- 70V: 1250W
- 100V: 1250W
Bridge Mono – All Channels Driven
- 4Ω: 2500W
- 8Ω: 2500W
- 16Ω: 2500W
- 140V: 2500W
- 200V: 2500W