PD764i-215

Very high output full-range loudspeaker system

SRP £14,860.00 + VAT

The PD764i-215 Precision Directivity™ loudspeaker provides high-impact sound reinforcement at throw distances that are beyond the reach of single-driver designs. A single module produces greater than 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i-215 may be used in clusters with other PD family modules or singly as part of a distributed system.
  • 60° by 40° Coverage Pattern–symmetrical frontal dimensions allow horizontal or vertical orientation within an array.
  • IFS™ Interference Free Summation dual HF driver module eliminates destructive interference and increases output by 6 dB.
  • Dual 2432H compression drivers with 3” diaphragms.
  • Dual CMCD-82H 8” horn loaded cone mid-range drivers provide 6 dB greater output than traditional designs.
  • Dual 15” low-frequency Differential Drive®, dual voice coil – dual magnetic gap woofers.
  • Pattern control maintained to below 400 Hz.
  • Co-axial mid / high-frequency module layout improves mid frequency arrayability and minimizes size.
  • Integrated rigging system simplifies array design and construction.
Frequency Response (-10dB)36.5 Hz to 19.5 kHz
Frequency Response (±3 dB)42 Hz - 18.5 kHz
Coverage Pattern60° x 40°
Directivity Index (DI)16 dB
System Sensitivity (1w @ 1m)LF: 103 dB SPL; Passive Mid-High: 111 dB SPL
Maximum SPL (1m)LF - 141 dB Peak; MHF - 143 dB Peak
Transducer Power Rating (AES)LF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak)
CrossoverBi-Amp with passive mid/high crossover (Tri-Amp optional)
Crossover Frequencies220 Hz, 1.2 kHz
DSPCustom DSP for Crown ITHD and IT4x3500HD amplifiers
LF Driver2 x JBL 2265H 380 mm (15 in) Diferential Drive driver with 75 mm (3 in) dual voice coil
MF Driver2 x JBL CMCD-82H midrange driver with 200 mm (8 in) diameterDifferential Drive® dual 75 mm (3 in) voice coil
HF Driver2 x JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal ImpedanceLF: 4 ohms MF: 4 ohms HF: 16 ohms
EnclosureTrapezoidal with Rectangular sides, combination of 18 mm and 16 mm (5/8 in) exterior grade birch plywood
Enclosure WRC/WRX VersionFor direct exposure or extreme environments, berglassed with stainless steel hardware
GrilleBlack powder coated zinc treated 14 gauge perforated steel with black foam backing
Grille WRC/WRX VersionThree layer grille assy consisting of 16-gauge powder coated S.S., backed with O.C. foam and S.S. mesh
Input ConnectorNL4 for bi-amp operation or NL8 for tri-amp operation (optional)
Input Connectors WRC/WRX Version4 conductor 16 awg direct burial cable assy 20 length (or length TBD)
EnvironmentalAvailable WRC/WRX Version: IP55
Suspension Attachment52 total points (12 top and bottom, 11 each side, 6 back), M10 threaded hardware
Dimensions (H x W x D)991 mm x 991 mm x 1145.8 mm(39.0 x 39.0 x 45.1 in)
Net Weight (each)335 lbs (152 kg)
Crossover ModesPassive
System Power RatingLF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak) (AES rated)
Nominal LF Driver Impedance4 ohms
Nominal MF Driver Impedance4 ohms
Nominal HF Driver Impedance4 Ohms Passive Mid/High Crossover