Martin Exterior Linear Pro Cove QUAD

Overview

Martin Exterior Linear Pro Cove QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with colour boost technology and discreet yet robust housings. They offer uniform light distribution with a 100 degree beam angle that’s perfect for striking indirect lighting of ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels, or other permanent indoor or outdoor installations.

These lights feature homogenised colour mixing with 8 LEDs/ft and an integrated colour boosting feature for full powered illumination of a single colour or mixed colours. Each unit is factory calibrated for superior colour consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.

Packed with intelligent features, Cove QUAD models offer a dedicated colour temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favourite default colour temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle colour transitions.

With a high focus on sustainability, Cove QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy, and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

Features

Colour-calibrated QUAD colour LEDs (8 LEDs/ft)
Homogenous colour mixing
100° beam angle for indirect lighting applications
Dedicated colour temperature control channel (1800K - 12000K)
Selectable segment modes (1, 4 or 8 segments)
Selectable power consumption (12W/10W/5W) per foot
5W/ft power mode meets ASHRAE standards for linear facade lighting
Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
Hybrid power and data connector for easy daisy-chained configurations
DMX and RDM control
Integrated magnetic switch for local diagnostics
Rugged IP66 housing designed for permanent outdoor installations
Low weight 0.8 kg/ft (1.9 lbs/ft)
Compact design - 40mm (1.57 inch) width

Specifications

PHYSICAL

Width: 40 mm (1.57 inch.)

Height: 68 mm (2.67 inch)

Length - 1 ft Version: 312mm (1.02 ft)

Length - 4 ft Version: 1227mm (4.02 ft)

Weight - 1 ft Version: 0.85 kg (1.9 lbs)

Weight - 4 ft Version: 2.8 kg (6.2 lbs)

DYNAMIC EFFECTS

Colour mixing: RGBW

Colour temperature control: 1800K – 12000K in 50K steps (default 4000K)

Intensity: 0 - 100%

Segment Control: 0.5ft, 1 ft or full 4 ft fixture control

CONTROL AND PROGRAMMING

Control systems: DMX, RDM

Control resolution: 8-bit DMX individual colour control

User interface: Magnetic button to call up fixture status and test fixture

Stand-alone control: Up to 20 scenes with individual fade/hold times

DMX compliance: USITT DMX512/1990

RDM compliance: ANSI/ESTA E1.20

Dimmer Resolution: 16-bit DMX control of intensity

DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)

DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)

OPTICS

Light source: QUAD colour LED (8 LEDs per foot)

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

Beam angle: 100°

Binning: Tight color and flux binning

Calibration: Full Gamut Colour Calibration (1 step MacAdam ellipse)

*Figure obtained under manufacturer's test conditions

PHOTOMETRIC DATA

CRI (Colour Rendering Index) : >70

CCT: 1800K – 12000K (default 4000K)

Luminous output:

1 ft at 12W4 ft at 48W

FULL:590 lumens2520 lumens

RED:200 lumens1000 lumens

GREEN:450 lumens1880 lumens

BLUE:90 lumens420 lumens

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

CONNECTIONS
Power/data in/thru: 8-pin custom connectors
Surge Protection: 4 KV
Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
Maximum total string length (cable + fixtures)*: 150 m / 328 ft
* Refer to system diagram for details on fixture run limitations.

ELECTRICAL
AC power: 100-277 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A
Typical earth-leakage current 1 ft: 0.15 mA
Typical earth-leakage current 4 ft: 0.21 mA
Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

Power Consumption 1 ft
Maximum: 12 W / 10 W / 5 W *
Idle: 1.54 W *

Power Consumption 4 ft
Maximum: 48 W / 40 W / 20 W *
Idle: 2.30 W *

* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Idle: steady state, all LEDs at zero intensity.
Power Consumption: Depending on power setting mode.

THERMAL
Cooling: Convection
Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
Maximum ambient temperature: 45° C (113° F)*
Minimum ambient temperature: -30° C (-22° F)
*Above this temperature, the fixture regulates output to protect from overheating

Length

SKU	Manufacturer’s SKU	Image	Name	Colour/description
MAR1924	MAR-90570001		MARTIN EXTERIOR Linear Pro-Cove, Quad, 1ft	Cove QUAD - 1ft
MAR1925	MAR-90570004		MARTIN EXTERIOR Linear Pro-Cove, Quad, 4ft	Cove QUAD - 4ft