Martin Exterior Linear Pro DV QUAD

Overview

Martin Exterior Linear Pro DV (Direct View) QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output, colour boost technology and discreet yet robust housings. They are specifically designed for direct view applications and are equipped with a round diffuser and segment control for low resolution content and their high lumen output makes them highly visible in daylight situations. They are perfect for soft, direct view lighting solutions enhancing ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other applications needing similar lighting enhancements.

DV QUAD models feature homogenized colour mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single colour or mixed colours. Each unit is factory calibrated for superior colour consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.

Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default colour temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle colour transitions.With a high focus on sustainability, DV QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

Features

Colour-calibrated QUAD colour LEDs (8 LEDs/ft)
Homogenous color mixing
Round diffuser for soft appearance and extended viewing angle
Dedicated colour temperature control channel (1800K - 12000K)
Selectable segment modes (1, 4 or 8 segments)
Selectable power consumption (12W/10W/5W) per foot
Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
Hybrid power and data connector for easy daisy-chained configurations
DMX and RDM control
Integrated magnetic switch for local diagnostics
Rugged IP66 housing designed for permanent outdoor installations
Low weight 0.8 kg/ft (1.9 lbs/ft)
Compact design - 40mm (1.57 inch) width

Specifications

PHYSICAL
Width	40 mm (1.57 inch.)
Height	84 mm (3.31 inch.)
Length - 1 ft Version	312mm (1.02 ft)
Length - 4 ft Version	1227mm (4.02 ft)
Weight - 1 ft Version	0.85 kg (1.9 lbs)
Weight - 4 ft Version	2.8 kg (6.2 lbs)
DYNAMIC EFFECTS
Colour mixing	RGBW
Colour temperature control	1800K – 12000K in 50K steps (default 4000K)
Intensity	0 - 100%
Segment Control	0.5ft, 1 ft or full 4 ft fixture control
CONTROL AND PROGRAMMING
Control systems	DMX, RDM
Control resolution	8-bit DMX individual colour control
User interface	Magnetic button to call up fixture status and test fixture
Stand-alone control	Up to 20 scenes with individual fade/hold times
DMX compliance	USITT DMX512/1990
RDM compliance	ANSI/ESTA E1.20
Dimmer Resolution	16-bit DMX control of intensity
DMX channels 4ft	6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)
DMX channels 1ft	6/4/3/6 (standard/RAW/1 seg/2 seg)

Connections

Power/data in/thru: 8-pin custom connectors
Surge Protection: 4 KV
Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
Maximum total string length (cable + fixtures)*: 150 m / 328 ft
* Refer to system diagram for details on fixture run limitations.

Electrical

AC power: 100-277 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A
Typical earth-leakage current 1 ft: 0.15 mA
Typical earth-leakage current 4 ft: 0.21 mA
Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

Power Consumption 1 ft
Maximum: 12 W / 10 W / 5 W *
Idle: 1.54 W *

Power Consumption 4 ft
Maximum: 48 W / 40 W / 20 W *
Idle: 2.30 W *

* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Idle: steady state, all LEDs at zero intensity.
Power Consumption: Depending on power setting mode.

Optics

Light source: QUAD colour LED (8 LEDs per foot)
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Beam angle: 180°
Binning: Tight colour and flux binning
Calibration: Full Gamut Colour Calibration (1 step MacAdam ellipse)
*Figure obtained under manufacturer's test conditions

Thermal

Cooling: Convection
Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
Maximum ambient temperature: 45° C (113° F)*
Minimum ambient temperature: -30° C (-22° F)
*Above this temperature, the fixture regulates output to protect from overheating

Photometric Data

CRI (Colour Rendering Index) : >70
CCT: 1800K – 12000K (default 4000K)
Luminous output:
1 ft at 12W 4 ft at 48W
FULL: 440 lumens 1770 lumens
RED: 150 lumens 690 lumens
GREEN: 330 lumens 1310 lumens
BLUE: 60 lumens 290 lumens
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.