Martin Exterior Wash Pro L CTC

Overview

Engineered for harsh conditions and creativity, Exterior Wash Pro L CTC provides a logical, user-friendly and versatile lighting solution designed to illuminate larger structures and building facades.

Featuring external lenses and an optional baffle snoot, this fixture provides configurable beam control. Exterior Wash Pro L CTC offers dedicated colour temperature control from 2400K- 6500K. Designed for permanent outdoor installations and backed by a 5-year warranty, this fixture meets rigorous environmental standards.

Features

Logic family of four sizes and lumen packages (S, M, L, XL)
Compact and slim design
Extended colour temperature control from 2400K - 6500K
More than 60 lm/W efficacy
Narrow beam-angle using high-power LEDs
Optional baffle snoot
Externally mounted micro lens diffusers
RDM and DMX control
Local diagnostics and focusing via magnetic sensor
Power and DMX In/Out pre-mounted cables
Optional Hybrid In/Out cable solution
Fully weatherised housing (IP66, IK08 and C-5 High corrosion rating)
5-year warranty

Specifications

DYNAMIC EFFECTS

Intensity: 0 - 100 %

Colour temperature control: 2400K - 6500K

CONTROL AND PROGRAMMING

Control systems: DMX, RDM

User interface: Magnetic sensor for local diagnostics and focusing

Stand-alone control: Up to 20 scenes with individual fade/hold times

Control resolution: 8-bit DMX control of each colour

Dimmer Resolution: 16-bit DMX control of intensity

DMX channels: 3/3 (Standard/Basic)

DMX compliance: USITT DMX512/1990

RDM compliance: ANSI/ESTA E1.20

DMX/RDM Transceiver: Galvanic-isolated RS-485

Firmware update: Serial upload via DMX link

OPTICS

Light source: 12 x 2400K, 12 x 4000K, 12 x 6500K white colour LEDs

Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*

LED manufacturer: Cree

Binning: Tight colour and flux binning

*Figure obtained under manufacturer's test conditions at Ta = 25° C.

BEAM ANGLE OPTIONS

Native beam angle: 7°

Narrow micro lens: 9°

Medium micro lens: 15°

Wide micro lens: 30°

Very Wide micro lens: 50°

Asymmetric micro lens: 8° x 60°

PHOTOMETRIC DATA

CRI (Colour Rendering Index) : > 70

CCT: 2400K - 6500K (default 4000K)

LUMINOUS OUTPUT*

2400K: 4900 lm

4000K: 10500 lm

6500K: 7500 lm

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.

INSTALLATION
Mounting: Adjustable bracket
Orientation: Any
Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

CONNECTIONS
Power connection: 2 m (6.5 ft.) cable tail open ended
Power input cable type, EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE
Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
Data connection: 2 m (6.5 ft.) open ended 6-conductor combined input + output cable tail
Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

ELECTRICAL
AC power: 100 - 240 / 277 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 13 A
Surge protection: 4 KV
Max earth leakage: 0.5 mA
Power factor: 0.99 @ 110 V / 120 V, 0.95 @ 208 V / 230V, 0.92 @ 277 V
Max current draw: 1.50 A @ 100 V, 1.25 A @ 120 V, 0.65 A @ 230 V, 0.54 A @ 277 V

POWER CONSUMPTION
Maximum: 150 W (reduced mode 120W)*
Idle: 3.5 W*
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

THERMAL
Cooling: Convection
Total heat dissipation (calculated, +/- 10%): 512 BTU/hr
Maximum ambient temperature: 45° C (113° F)*
Minimum ambient temperature: -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**Power must be maintained below -20° C (-4° F)

PHYSICAL
Length: 165 mm (6.49 inch)
Width: 275 mm (10.83 inch.)
Height: 370 mm (14.57 inch.)
Weight: 12.4 kg (27.3 lbs)