Martin Exterior Wash Pro M QUAD

Overview

Engineered for harsh conditions and creativity, Exterior Wash Pro M QUAD provides a logical, user-friendly and versatile lighting solution designed to illuminate medium sized structures and building facades.

Featuring external micro lenses and an optional baffle snoot, this fixture provides configurable beam control. The Exterior Wash Pro M QUAD features unparalleled colour performance. The factory colour calibration ensures superior colour consistency and provides a dedicated colour temperature control channel spanning from 1000K to 12,500K, precisely following the black-body curve. The integrated colour boost technology encompassing smart ratio between LED capacity and PSU capacity results in saturated and mixed colours up to three times brighter than previous models.

Designed for permanent outdoor installations and backed by a 5-year warranty, this fixture meets rigorous environmental standards.

Features

Logic family of four sizes and lumen packages (S, M, L, XL)
Compact and slim design
Superior colour consistency based on factory calibration
Color boost for bright saturated and mixed colours
Dedicated colour temperature control channel
Narrow beam-angle using high-power RGBW LEDs
Optional baffle snoot
Externally mounted micro lens diffusers
RDM and DMX control
Local diagnostics and focusing via magnetic sensor
Power and DMX IN/OUT pre-mounted cables
Optional Hybrid IN/Out cable solution
Fully weatherised housing (IP66, IK08 and C-5 High corrosion rating)
Shipped in FSC certified cadrboard packaging
5-year warranty

Specifications

DYNAMIC EFFECTS

Intensity: 0 - 100 %

Colour mixing: RGB + CTC (Colour Temperature Control)

Colour temperature control: 1000 K - 12500K in 50K steps

CONTROL AND PROGRAMMING

Control systems: DMX, RDM

User interface: Magnetic sensor for local diagnostics and focusing

Stand-alone control: Up to 20 scenes with individual fade/hold times

Control resolution: 8-bit DMX control of each colour

Dimmer Resolution: 16-bit DMX control of intensity

DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw)

DMX compliance: USITT DMX512/1990

RDM compliance: ANSI/ESTA E1.20

DMX/RDM Transceiver: Galvanic-isolated RS-485

Firmware update: Serial upload via DMX link

OPTICS

Light source: 9 x high-power RGBW LEDs

Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*

LED manufacturer: Osram

Binning: Tight colour and flux binning

Calibration: Full Gamut Colour Calibration (1 step MacAdam ellipse)

*Figure obtained under manufacturer's test conditions at Ta = 25° C.

BEAM ANGLE OPTIONS

Native beam angle: 8°

Narrow micro lens: 11°

Medium micro lens: 15°

Wide micro lens: 30°

Very Wide micro lens: 50°

Asymmetric micro lens: 8° x 50°

PHOTOMETRIC DATA

CRI (Color Rendering Index) : > 70

CCT: 1000K - 12500K (Default 4000K)

LUMINOUS OUTPUT*

Full: 3200 lm

Red: 1100 lm

Green: 2200 lm

Blue: 750 lm

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.

INSTALLATION
Mounting: Adjustable bracket
Orientation: Any
Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

CONNECTIONS
Power connection: 2 m (6.5 ft.) cable tail open ended
Power input cable type, EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE
Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
Data connection: 2 m (6.5 ft.) open ended 6-conductor combined input + output cable tail
Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

ELECTRICAL
AC power: 100 - 240 / 277 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 12 A
Surge protection: 4 KV
Max earth leakage: 0.5 mA
Power factor: 0.99 @110 V / 120 V, 0.94 @208 V / 230V, 0.90 @277 V
Max current draw: 0.75 A @100 V, 0.62 A @120 V, 0.33 A @230 V, 0.27 A @ 277 V

POWER CONSUMPTION
Maximum: 75 W (reduced mode 60W)*
Idle: 2.5 W*
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

THERMAL
Cooling: Convection
Total heat dissipation (calculated, +/- 10%): 256 BTU/hr
Maximum ambient temperature: 45° C (113° F)*
Minimum ambient temperature: -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**Power must be maintained below -20° C (-4° F)

PHYSICAL
Length: 152 mm (5.98 inch.)
Width: 201 mm (7.91 in.)
Height: 303 mm (11.93 in.)
Weight: 7.3 kg (16.1 lbs)