Martin Exterior Wash Pro S QUAD

Overview

Engineered for harsh conditions and creativity, Exterior Wash Pro S QUAD provides a logical, user-friendly and versatile lighting solution designed to illuminate smaller structures, features of a building and landscaping. Featuring external micro lenses and an optional baffle snoot, this fixture provides configurable beam control. The Exterior Wash Pro S QUAD features unparalleled colour performance. The factory colour calibration ensures superior colour consistency and provides a dedicated colour temperature control channel spanning from 1000K to 12,500K, precisely following the black-body curve. The integrated colour boost technology encompassing smart ratio between LED capacity and PSU capacity results in saturated and mixed colours up to three times brighter than previous models. Designed for permanent outdoor installations and backed by a 5-year warranty, this fixture meets rigorous environmental standards.

Features

Logic family of four sizes and lumen packages (S, M, L, XL)
Compact and slim design
Superior colour consistency based on factory calibration
Color boost for bright saturated and mixed colours
Dedicated colour temperature control channel
Narrow beam-angle using high-power RGBW LEDs
Optional baffle snoot
Externally mounted micro lens diffusers
RDM and DMX control
Local diagnostics and focusing via magnetic sensor
Power and DMX IN/OUT pre-mounted cables
Optional Hybrid IN/Out cable solution
Fully weatherised housing (IP66, IK08 and C-5 High corrosion rating)
Shipped in FSC certified cardboard packaging
5-year warranty

Specifications

DYNAMIC EFFECTS

Intensity: 0 - 100 %

Colour mixing: RGB + CTC (Colour Temperature Control)

Colour temperature control: 1000 K - 12500K in 50K steps

INSTALLATION
Mounting: Adjustable bracket
Orientation: Any
Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

CONTROL AND PROGRAMMING
Control systems: DMX, RDM
User interface: Magnetic sensor for local diagnostics and focusing
Stand-alone control: Up to 20 scenes with individual fade/hold times
Control resolution: 8-bit DMX control of each colour
Dimmer Resolution: 16-bit DMX control of intensity
DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
DMX/RDM Transceiver: Galvanic-isolated RS-485
Firmware update: Serial upload via DMX link

OPTICS
Light source: 4 x high-power RGBW LEDs
Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*
LED manufacturer: Osram
Binning: Tight color and flux binning
Calibration: Full Gamut Colour Calibration (1 step MacAdam ellipse)
*Figure obtained under manufacturer's test conditions at Ta = 25° C.

BEAM ANGLE OPTIONS
Native beam angle: 8°
Narrow micro lens: 11°
Medium micro lens: 15°
Wide micro lens: 30°
Very Wide micro lens: 50°
Asymmetric micro lens: 8° x 50°

PHOTOMETRIC DATA
CRI (Colour Rendering Index) : > 70
CCT: 1000K - 12500K (Default 4000K)

LUMINOUS OUTPUT*
Full: 1500 lm
Red: 550 lm
Green: 1000 lm
Blue: 350 lm
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.

CONNECTIONS
Power connection: 2 m (6.5 ft.) cable tail open ended
Power input cable type, EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE
Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
Data connection: 2 m (6.5 ft.) open ended 6-conductor combined In/Out cable tail
Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

ELECTRICAL
AC power: 100 - 240 / 277 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 12 A
Surge protection: 4 KV
Max earth leakage: 0.5 mA
Power factor: 0.99 @110 V / 120 V, 0.94 @208 V / 230V, 0.92 @277 V
Max current draw: 0.35 A @100 V, 0.29 A @120 V, 0.15 A @230 V, 0.13 A @277 V

POWER CONSUMPTION
Maximum: 35 W (Reduced mode 28W)*
Idle: 2.0 W*
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

THERMAL
Cooling: Convection
Total heat dissipation (calculated, +/- 10%): 119 BTU/hr
Maximum ambient temperature: 45° C (113° F)*
Minimum ambient temperature: -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**Power must be maintained below -20° C (-4° F)