Active PDE Junction Box
-w118h88.jpg)
.jpg)
Active PDE Junction Box
The Martin PDE Junction Box Active merges power, DMX and Ethernet signals into a single connector and cable system as used by the Martin VDO Atomic family of fixtures.The unit also features a DMX-thru and Ethernet-thru port, supported by the internal RDM-compliant DMX splitter and 3-port Ethernet switch with fail-safe bypass.
The multi-color status LED gives a clear indication of the protocol being received, as it is compatible with DMX, Art-Net, sACN and Martin P3. And, the convenient test button allows all connected fixtures to be tested at once for easy system checking during installation.The box is fully IP65 rated for outdoor use and features a robust metal housing. The flanges on the side allow for mounting to any surface, while the M10 threaded hole allows for the attachment of a rigging clamp.OVERVIEW
- powerCON TRUE1 TOP power in & thru
- XLR 5 TOP DMX in & thru (build-in DMX/RDM splitter)
- etherCON TOP Ethernet in & thru (build-in gigabit switch with fail-safe bypass)
- Martin PDE Hybrid output
- IP65 rated
- Status LED to indicate received protocol
- Pushbutton to recall test patterns on all attached fixtures
- Robust metal housing
- Wall or truss-mountable
| CONTROL AND PROGRAMMING | |
|---|---|
| Control Protocols | DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3 |
| Protocol Detection | RDM, RDM over Art-Net or P3 |
| Fixture identification | User-settable ID number |
| DMX Compliance | USITT DMX512-A |
| RDM Compliance | ANSI/ESTA E1.20 |
| Art-Net Compliance | Art-Net 1, 2, 3 and 4; |
| sACN Compliance | ANSI E1.31 - 2016 |
| Martin P3 Compliance | P3 System Controller |
| DMX/RDM Transceiver IN/THRU | Opto-Isolated RS-485 |
| DMX/RDM Transceiver OUT | Opto-Isolated RS-485 |
| Ethernet Transceiver IN | 100/1000Mbit (with fail-safe |
| Ethernet Transceiver THRU | 100/1000Mbit |
| Ethernet Transceiver OUT | 10/100Mbit |
| Firmware Update | via DMX using Martin Companion or via |
| CONTROL/USER INTERFACE | |
| Device Status | Multi-color status LED |
| Fixture Test | Pushbutton to call up test pattern on fixtures connected to PDE output CONSTRUCTION |
| Colour | Black |
| Housing Material | Aluminum |
| Protection Rating | IP 65 |
| RoHS | Compliant |
| REACH | Compliant |
| CONNECTIONS | |
| AC Power input | Neutrik powerCON TRUE1 TOP (IP 65) |
| AC Power thru | Neutrik powerCON TRUE1 TOP (IP 65) |
| DMX input | Neutrik XLR 5-pin Male TOP (IP 65) |
| DMX thru | Neutrik XLR 5-pin Female TOP (IP 65) |
| Ethernet input | Neutrik etherCON TOP (IP 65) |
| Ethernet thru | Neutrik etherCON TOP (IP 65) |
| AC Power, DMX and Network out | PDE hybrid connector (IP 65) |
| All connections hot plugging compatible | |
Martin Breakout Cable PDE to Power-DMX-Ethernet
SKU: MAR1912
The Martin PDE BreakOut Cable splits Power, DMX & Ethernet signals out from the single connector and cable system as used by the Martin VDO Atomic family of fixtures as an alternative to the Junction Boxes. Martin PDE Hybrid input, powerCON TRUE1 TOP power output, XLR 5 TOP DMX output and etherCON TOP Ethernet output. The cable is IP65 rated for outdoor use. View details
Martin Break In Cable Power=DMX-Ethernet to PDE
SKU: MAR1902
The Martin PDE BreakIn Cable merges Power, DMX & Ethernet signals into a single connector and cable system as used by the Martin VDO Atomic family of fixtures. The cable is fully IP65 rated for outdoor use View details
Martin Junction Box Power-DMX-Ethernet to PDE
SKU: MAR1749
Combines power, P3 data & DMX and outputs PDE hybrid connector to connect to VDO Atomic Dots. Neutrik powerCON TRUE1 power input. Neutrik XLR5 and etherCON data inputs. M10 hole for truss mounting with a clamp. Holes for wall/surface mounting. Maxiumum of 32 fixtures per chain.
View details