Next-generation mid-size line-array

VTX V20

 

Revolutionary D2 Driver

VTX V20 features three D2415K transducers – a new small format version of the patented D2 Dual Diaphragm, Dual Voice Coil annular (ring radiator) compression driver that delivers a dramatic increase in pure high frequency extension and sound pressure levels with significantly lower distortion, reduced power compression and lower weight combined with increased power handling, linearity and dynamic headroom.

 

Stable 110° Horizontal Coverage

A new Radiation Boundary Integrator (RBI) waveguide based on the same proven design principles that have been so successfully employed for both the VTX V25 and VERTEC® VT4886 subcompact line array elements, provides stable 110-degree horizontal coverage for V20, combined with perfect line source array coupling from 0 – 12.5 degrees in the vertical plane. The VTX V20 features a highly integrated, modular design with unique cast-aluminum baffle and HF waveguide construction that allows the enclosure to achieve the same tightly-packed power density as the V25 along with the added benefits of light weight, improved structural rigidity and enhanced heat dissipation.

 

All-new Suspension System

VTX V20's new ASM Suspension System was specifically designed for ease of transport and handling, speed of installation and versatile re-configurability. Fully captive, ergonomic flip hingebars work in conjunction with a rotary cam angle stop mechanism (ASM) to select inter-enclosure angles quickly and efficiently while the array is being deployed. The dual mode ASM suspension system facilitates operation in either compression mode (using a rear pullback motor or hand hoist to set inter-enclosure angles) or traditional fixed angle suspension mode (using quick release pins to secure angles between enclosures). During de-installation, ASMs can quickly be reset to zero degrees to configure enclosures into travel position for convenient landing onto vertical transporters that are specifically designed to have truck pack friendly dimensions.

 

All new Array Frame

A completely new array frame and extension bar design complements the V20 suspension system, providing a high degree of flexibility for either compression or tension mode suspension as well as tilt adjustment capability for stacked configurations. An additional adapter accessory is under development that will allow V20 to be suspended under V25 enclosures for downfill applications.

 

VTX S25 Subwoofer

The companion VTX S25 subwoofer uses a pair of the same 2000-Watt continuous, 15-inch Differential Drive transducers employed in the fullsize V25, ensuring the same sonic signature while allowing V20 and S25 arrays to be used for outfill, center cluster or delay system applications in conjunction with main left/right V25 arrays. The S25 is cardioid-arrayable, and can be suspended in the middle of V20 arrays to provide effective balcony/floor coverage and under-balcony penetration for theatrical sound design applications. Alternatively, S25 enclosures can be flown at the top of V20 arrays in either front-firing or cardioid mode to extend the low frequency length of the line array and provide improved low frequency pattern control and throw, similar to the manner in which S28 enclosures can be deployed at the top of V25 arrays.

 

Total System Integration and Support

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.

 

Powered by Crown

VRack is a rugged touring rack fitted with three Crown ITech HD Series power amplifiers, power input panel, custom-engineered input / output panels that is available in two configurations: VRack 12000 and VRack 4 x 3500 are loaded with three IT 12000HD and three IT 4 x 3500HD, respectively.

 

Performance Manager Software

Designed specifically for touring and theatrical sound engineering, JBL HiQnet Performance Manager is an application-specific iteration of HiQnet System ArchitectTM - the connectivity and control application for professional-grade audio system integration. The patented workflow paradigm of the Performance Manager interface guides the system designer through the complete system design, configuration and control process and, in many ways, the entire process feels and acts like a simple step-by-step wizard.

 

Photos from our UK launch event at London's LH2 on 15th July 2014

Next Steps

Download