BSS BLU-DIG-OUT

Overview

The Soundweb London Digital Output card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. These digital cards enable Soundweb London devices to receive AES/EBU and S/PDIF audio signals.

The Digital Output Card can be configured in the following ways:

2 Stereo AES/EBU Signals
1 Stereo AES/EBU signal / 1 Stereo S/PDIF Signal
2 Stereo S/PDIF Signals

The Digital Output Card has two Combicon connectors which are used as follows:

Connector 1
- Stereo Audio, Channels 1 and 2 - AES/EBU / S/PDIF
- Stereo Audio, Channels 3 and 4 - AES/EBU / S/PDIF
Connector 2*
- Clock Input - High Impedance
- Clock Input - 75R Terminated

* active clock selected within HiQnet London Architect

Connector	[Clock Input]		[Audio Output]
Signal	3&4	1&2	3&4	1&2
Pin	[S + -]	[S + -]	[S + -]	[S + -]

Clock Input	Positive: to +	AES/EBU	Positive: to +	S/PDIF	Signal: to +
	Negative: to -		Negative: to -		Signal Ground: to -
	nil or -: to S		Shield: to S		Shield*: to S
				* Short "S" to "-" for unshielded cable