VRX918S-P

18 in. High Power Powered Flying Subwoofer

SRP £3,035.00 + VAT

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Driver, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

  • Built-in JBL DrivePack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power.
  • DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Driver woofer for high-power capacity and
    light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion.
Frequency Range31 Hz - 220 Hz
Frequency Response34 Hz - 220 Hz
Maximum Peak Output126 dB SPL at 1m
LF Driver1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Driver woofer with neodymium-magnet
Bandpass Nominal ImpedanceLF: 2 x 2 ohms
Power Rating1500 Watts PeakLF: Dual-Bridged TechnologyT, Class D
Audio Input ConnectorXLR with loop through
User ControlsInput Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
Signal ProcessingDSP based, resident in Input Module
System ManagementDSP based limiters for mechanical and thermal protection
AC Power Operating Range90-132 VAC or 216-264 VAC, 50/60Hz
AC Line VoltageUser selectable: 120V/240V (-15%, +10%)
AC Input ConnectorNeutrik PowerCon (NAC 3MPA)
AC Loop Through ConnectorNeutrik PowerCon (NAC 3MPB)
AC Current Requirements6A per system at 120V, 3A per system at 240V
Enclosure18 mm birch plywood.
Suspension / MountingOptional VRX-AF line-array frame kit or 10 mm forged eyebolts
FinishBlack DuraFlex™ finish
GrillePowder coated, black, 16-gauge perforated steel with acoustically transparent foam
Dimensions(H x W x D)508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Net Weight38.5 kg (85 lb)
Optional AccessoriesVRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit