Read more
The VTX M Series dual 10” M20 professional stage monitor features a high performance differential drive woofer and the large-format D2 dual-diaphragm dual voice-coil high frequency driver. The option of Single-Channel (Passive) or Dual-Channel (Bi-Amp) operation modes comes standard, allowing the user to choose the right option for the application, with no compromise in output power or performance.
Drawing on JBL’s unique history of sharing technological innovations across product lines, the VTX M Series HF waveguide features Image Control Waveguide Technology, which provides a broad and stable 60H x 60V coverage that delivers maximum gain-before-feedback. All of these premium, tour-ready features are enclosed in a modern, low profile design that is lightweight, ergonomic, and show-ready for even the most high profile concerts or broadcast events. And because VTX M Series is part of the VTX family, it comes fully supported in JBL HiQNet Performance Manager with V5 presets.
TECHNOLOGY
D2 DUAL DIAPHRAGM DUAL VOICE COIL COMPRESSION DRIVER
The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.
LEARN MORE
DIFFERENTIAL DRIVE® TECHNNOLOGY
Enhanced Performance and Dramatically Reduced Driver Weight
JBL's exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.
LEARN MORE
SYSTEM INTEGRATION
System Integration and Management
With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyse, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.
LEARN MORE
Frequency Range (-10 dB) | 55 Hz - 19.5 kHz |
Coverage Pattern (-6 dB) | Horizontal: 60; Vertical: 60 |
System Input Power Rating1 | Passive: 1250 W Continuous (IEC / 100 hour) Active: LF: 1250 W Continuous (IEC / 100 hour) HF: 100 W Continuous (IEC / 100 hour) |
Maximum Peak Output2 | 136dB (Preset: VTX M20 FR) |
System Latency3 | 3.33ms |
System Processing | Crown Audio I-Tech HD Series Crown Audio I-Tech 4x3500HD |
System Impedance | Passive: 4 ohms Active: LF: 4 ohms, HF: 8 ohms |
Low Frequency Transducer | 2 x 2261H, 254 mm (10 in) diameter, dual 76 mm (3 in) diameter voice coil, NDD®, Direct Cooled™ |
High Frequency Transducer | 1 x D2430H, D2 dual diaphragm, dual 76mm (3 in) diameter voice coil |
Monitor Angle | 30 degrees |
Construction | 18 mm, 11-ply Finnish birch plywood |
Grille | Powder Coated 14 gauge hex-perforated steel with acoustically-transparent black cloth backing |
Input Connectors | Passive: Neutrik® Speakon® NL-4 (4x): Selectable: Pins 1 ± or Pins 2 ± Active: Neutrik® Speakon® NL-4 (4x): Pins 1 ± (LF) | Pins 2 ± (HF) |
Dimensions (H x W x D) | 342.9 mm x 575.0 mm x 515.3 mm (13.6 in x 22.6 in x 20.3 in) |
Net Weight | 23 kg (51 lbs) |
Sound Technology’s professional audio products are specified and supplied by leading resellers and integrators throughout the country, together with a select number of trade distributors.
If you are a trade customer please call Sound Technology Ltd on +44(0)1462 480000 for more information or call one of our sub-distributors listed below.
Copy and paste the link below to share this page:
Dual 12
RRP ex VAT: £3,385.00
SKU: JBL1729
The VTX M Series dual 12” M22 professional stage monitor features a high performance differential drive woofer and the large-format D2 dual-diaphragm dual voice-coil high frequency driver. The option of Single-Channel (Passive) or Dual-Channel (Bi-Amp) operation modes comes standard, allowing the user to choose the right option for the application, with no compromise in output power or performance.…
View detailsWe use essential and statistics cookies on our website to help make it better.
You can use this tool to customise your cookie settings, or you can click below to accept all cookies.
Some of the cookies we use are essential for the site to work.
We also use some non-essential cookies for web statistics purposes (counting visits to our website).
To control third-party cookies, you can also adjust your browser settings.
Save these settings