VTX-V25-CS-K

JBL VTX-V20-VT

Vertical Transporter

RRP ex VAT: £990.00
SKU: JBL1605

The VTX-V20-VT vertical transporter is a simple and cost-effective solution for vertically transporting VTX V20 enclosures in blocks of 3 or 4 cabinets high. Measuring 35” wide by 16” deep, the VTX-V20-VT will travel 5 across (length-wise) in standard 90” trucks.

JBL VTX-V20-VT-CVR

Vertical Transporter Cover

RRP ex VAT: £685.00
SKU: JBL1606

Reinforced, padded protective cover for 3x or 4x VTX V20 enclosures when transported vertically.

JBL VTX-V20-AF

Array Frame

RRP ex VAT: £3,960.00
SKU: JBL1609

Array Frame used for suspending or ground stacking VTX V20 or VTX S25 enclosures. Includes height-adjustable leveling feet, optional extension bar available.

JBL VTX-V20-AF-EB

Extension Bar

RRP ex VAT: £1,155.00
SKU: JBL1610

Extension Bar accessory used in conjunction with the VTX-V20-AF array frame for deploying VTX V20 systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be…

JBL VTX-V20-LH

Lever Hoist

RRP ex VAT: £610.00
SKU: JBL1636

Factory-approved manual lever hoist for compression of VTX V20 systems. The CM Series 653 for use with VTX V20 is a 3/4 ton model with 20’ of chain length for compressing arrays of up to 20 cabinets with no additional extension hardware needed.

Included:

• 1 x CM Lever Hoist (3/4 ton rating) with 20' of chain

JBL VTX-V20-VT-CVRW

Vertical Transporter Cover Wrap

RRP ex VAT: £685.00
SKU: jbl1809

Reinforced, padded protective cover for 3x or 4x VTX-V20 enclosures plus VTX-V20-AF array frame when transported vertically. The cover features on open top design that allows the array frame to remain attached during transport.

Included:

• 1 x VTX-V20-VT-CVRW

JBL VTX-S25-VT

Vertical Transporter

RRP ex VAT: £760.00
SKU: JBL1607

Vertical Transporter for transportation of up to three VTX S25 enclosures in a vertical column in either front-firing or cardioid mode. Includes: dolley board with four tour grade casters (2 locking casters per dolley board). Reinforced protective cover (VTX-S25-VT-CVR) supplied separately.

JBL VTX-S25-VT-CVR

Vertical Transporter Cover

RRP ex VAT: £840.00
SKU: JBL1608

Vertical Transporter Cover for use with VTX-S25-VT. Modular, reconfigurable design allows for protection of two or three VTX S25 enclosures in either front-firing or cardioid mode.

JBL VTX-V25-CS-K-LJ

Label Kit

RRP ex VAT: £115.00
SKU: JBL1654

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels. 

The kit includes: 

• 2 spare labels
• Label jig installation fixture
• Detailed instructions (see documentation download)NOTE: At least one label jig installation fixture should be ordered per VTX-V25-CS-K order

JBL VTX-V25-PB

Pull Back Accessory

RRP ex VAT: £1,195.00
SKU: JBL1656

Pull Back accessory for attachment to bottom V25 enclosure to facilitate compression suspension of VTX-V25-CS-K equipped arrays. Includes all parts needed to properly compress a VTX V25 array equipped with the VTX-V25-CS-K compression suspension kit.

• Spreader bar with integrated attachment brackets
• Master link
• Shackles and dual leg chain bridle with locking safety hooks
• The only factory-approved device for compression of VTX V25 arrays

JBL VTX-V25-LH

Lever Hoist

RRP ex VAT: £875.00
SKU: JBL1657

Factory-approved manual lever hoist for compression of VTX-V25-CS-K equipped systems. The CM Series 653 for use with VTX V25 is a 1 ½ ton model with 20’ of chain length for compressing arrays of up to 18 cabinets with no additional extension hardware needed.

• Lever Hoist (1 ½ ton rating) for use with VTX-V25-PB
• For compression of VTX-V25-CS-K equipped arrays

JBL VTX-S28-VTC

Vertical Transporter

RRP ex VAT: £1,505.00
SKU: JBL1652

The VTX-S28-VTC vertical transporter can accommodate 3x S28 enclosures high in either front-firing or cardioid mode and transporters are dimensioned to fit 2 across (width-wise) in standard 96” trucks. The VTX-S28-VTC transporter features heavy duty locking casters and is stackable plus fully compatible with existing VTX-S28-CVR protective covers.…

JBL VTX-V25-VTC

Vertical Transporter

RRP ex VAT: £1,345.00
SKU: JBL1651

With design features similar to VTX-V20-VT, the VTX-V25-VTC is a simple and cost-effective solution for vertically transporting VTX V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trailers, and 2 across (width-wise) in standard 96” trucks.

• Can transport 3x or 4x V25 enclosures high
• Heavy duty locking casters
• Stackable
• Fully compatible with existing VTX-V25-VT-CVR protective covers

JBL VTX-S28-VT-CVR

Padded Cover

RRP ex VAT: £1,105.00
SKU: JBL1643

Reinforced, padded protective cover for 3 VTX-S28 enclosures when transported vertically in either front-firing or cardioid mode. 

• Handle cutouts
• Rear panel access flap

JBL VTX-V25-AF-EB

Array Frame Extension Bar

RRP ex VAT: £1,485.00
SKU: JBL1615

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can…

JBL VTX-S28-ACC

Accessory Cover and Castorboard

RRP ex VAT: £1,295.00
SKU: JBL1199

VTX Series S28 Accessory Kit for transportation and protection of one VTX S28 enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly caster-board with rugged tour grade casters and rotating cam mechanisms for secure attachment to the S28 enclosure. Beveled recesses auto-locate with S28 caster board mount tabs. The rotating cam mechanism can be released while S28 cabinets are face down during the suspension process (no need to manually remove caster board). …