MULTI-DATA/PAK - Demultiplexer
KEY FEATURES
Converts DMX into analog signals
Converts MIDI Data to analog signals
Works on +-10/+-12/+-15 Volt output
Switchable polarity
Display for setup and start address
Back-up function
72ch automatic chaser integrated
Converts DMX-512 & MIDI signals to 72 Channel Analog
3pin and 5pin XLR DMX in- and outputs
LCD Display with corresponding scroll buttons control
DMX start address and programming options
Memory back-up with (EPROM)
Speed Control
Chase 2 - 72 channels
Select Analog output from +(-)10V, +(-)12V and +(-)15V
MIDI on/off signal
3 x 25 pin outputs on rear panel
Fuse conveniently located on front panel
1 rack space
Voltage: 120V / 220V
Fuse: 0,5A 250V 5x20mm
Dimensions: 483x127x44 mm
Weight: 2.27 kg
-w196h196.jpg)
Elation A-Loader HH
Software Uploader Device
SKU: ELA0005
he A loader HH™ is a battery powered hand held software uploader device used to update Elation compatible lighting fixtures. Easily upload a software update to an Elation lighting fixture by connecting the uploader to the fixture using a 3pin or 5pin DMX cable (not included). Elation software updates (not included) are stored on a SD card (included) and inserted into the uploader. A loader HH™ features an LCD display, 4 push button control panel, a SD card slot, 3pin and 5pin XLR DMX outputs, an On/Off switch and includes a 12VDC external power supply and blank SD card. View details
Elation C-Loader II
Battery Powered Handheld Software Uploader Device
SKU: ELA0038
The C loader-II™ is a battery powered hand held software uploader device used to update and test Elation compatible lighting fixtures. Easily upload a software update to an Elation lighting fixture by connecting the uploader to the fixture using a 3pin DMX cable (not included). Elation software updates (not included) are stored on a MICRO SD card (included) and inserted into the uploader. The C-Loader-II™ can also be used as a DMX and RDM Tester. The C loader-II™ features an LCD display, 6 button control panel, a MICRO SD card slot, a 3pin XLR DMX output, an On/Off switch, and includes…
View details
Elation E-Fly Transceiver
Long Range Wireless DMX Transceiver
SKU: ELA0081
The E-FLY™ Transceiver is a long range wireless DMX Transceiver (Transmitter/Receiver in one) that is compatible with other E-FLY™ products and includes a rechargeable battery, which provides a solution for remote applications where access to power is a challenge. Connected to a DMX Controller, the E-FLY™ Transceiver will provide a constant and reliable wireless DMX signal up to 2,500 feet (762m) to other Elation E-FLY™ products. The 2.4 GHz wireless frequency will coexist in busy RF environments alongside technologies like Bluetooth and Wi-Fi.…
View details
Elation E-Loader III Softw.Update Box f. Elation
SKU: ELA0082
The E-LOADER III™ is a battery powered hand held software uploader device used to update Elation compatible lighting fixtures. Easily upload a software update to an Elation lighting fixture by connecting the E-LOADER III™ to the fixture using the included 3pin DMX cable. Elation software updates (not included) are stored on a MICRO SD card (included) and inserted into the uploader.…
View details
Elation KL Spot IP Framing Module
SKU: ELA0166
This optional module can be installed to add fully automated blackout framing shutters to the KL Spot IP. 4 Fully Automated Full Blackout Framing Blades, +/- 60 Indexing View details
Elation WP-06
Waterproof Outdoor Dome
SKU: ELA0421
If it's an installation or an event, whenever it's outdoors, there's a chance of rain. To make sure the gear is protected, outdoor domes come into use. When extra protection regarding heat and humidity is needed, the WP-06 is the right tool for the job. View details
Elation EZ Kling
RJ45 to DMX, KlingNet™, ArtNet and sACN interface
SKU: ELA0084
The EZ KLING™ is an RJ45 to DMX, KlingNet™, ArtNet and sACN interface, which allows you to pixel map KlingNet™ and DMX compatible fixtures through the KlingNet™ mapper included in Media Master Express™ and Media Master Pro™ (not included). Ideal for use with Flex Pixel Tape™ and LED Pixel controllable DMX fixtures. One EZ KLING™ interface will drive up to 600 Flex Pixel RGB pixels using KlingNet™ control protocol or 170 DMX Pixels via ArtNet/ DMX control. EZ Kling™ can also be used as a 1-port Node to convert ArtNet to DMX. Includes a magnet on the back panel for easy metal…
View details
Elation IP Tester
SKU: ELA0129
The IP TESTER is a unique mobile service tool developed by Elation to test the integrity of any compatible IP-rated lighting fixture such as Elation’s PROTEUS series fixtures, after being opened for lamp and gobo replacement or repair. Unlike other IP fixture test devices currently available in the market, Elation’s IP TESTER has been designed to test for both Vacuum and Pressure leaks.…
View details
Elation IPC415
SKU: ELA0130
The IPC415™ is a 19” rack mountable intelligent DMX power control center, featuring 4 locking power outputs (15A each), 4 5pin XLR DMX outputs, 1 5pin XLR DMX input and 1 5pin XLR DMX through and a multi-voltage universal auto switching power supply (100-240v 50/60Hz). Power to the power outputs can be scheduled to automatically switch On/Off via an internal scheduler when DMX signal is lost or when a specific cue is triggered from a DMX console. The IPC415™ can be mounted with the 19” rackmounts or truss mounted using a clamp (not included) attached to the M10 rigging point in the…
View details
Elation LTrack C-Clamp 44.5mm (CA2)
For Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L
SKU: ELA0174
The 44.5mm L-Track Narrow Clamp adapter is specifically designed for seamless integration with the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L. Offering unmatched versatility and reliability, it secures your valuable equipment with precision. This adapter, crafted with meticulous engineering, guarantees a perfect fit within the Pulse Bar S, Pulse Bar L, and Pulse Panel ecosystem, providing a hassle-free solution for mounting and securing your gear.…
View details-w470h470.jpg)
Elation LTrack C-Clamp 70mm (CA1)
For Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L
SKU: ELA0175
The 70.1mm L-Track Narrow Clamp adapter is specifically designed for seamless integration with the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L. Offering unmatched versatility and reliability, it secures your valuable equipment with precision. This adapter, crafted with meticulous engineering, guarantees a perfect fit within the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L ecosystem, providing a hassle-free solution for mounting and securing your gear.…
View details
Elation LTrack to M10 Adapter, 44.5mm (A2)
For Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L
SKU: ELA0176
The 44.5mm L-Track clamp adapter is specifically designed for seamless integration with the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L. Offering unmatched versatility and reliability, it secures your valuable equipment with precision. This adapter, crafted with meticulous engineering, guarantees a perfect fit within the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L ecosystem, providing a hassle-free solution for mounting and securing your gear.…
View details
Elation LTrack to M10 Adapter,70mm (A1)
For Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L
SKU: ELA0177
The 70.1mm L-Track clamp adapter is specifically designed for seamless integration with the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L. Offering unmatched versatility and reliability, it secures your valuable equipment with precision. This adapter, crafted with meticulous engineering, guarantees a perfect fit within the Pulse Bar S, Pulse Bar L, Pulse Panel, Six+ Bar S and Six+ Bar L ecosystem, providing a hassle-free solution for mounting and securing your gear.…
View details