DCi8|600DA
Eight-channel, 600W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
Eight-channel, 600W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.
INTEGRATED DANTE™NETWORKED AUDIO – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring
Recommended for: Installed Sound.
- Redundant Dante ports
- Primary
- Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
- 48kHz processing
- 20 Presets
- Input router
- High, medium, and low priority inputs
- Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring
- Pilot tone
- Normal
- Burst
- Continuous Load Monitoring
- Sweep Load Monitoring
- Channel Auto-Standby
- Speaker Tunings
- Aux-Port
- Sleep contact closure
- Amp Status output
- Removable air filters
- Front panel LED indicators
- POWER SPECIFICATIONS
- Dual-Mode - All Channels Driven
- 2Ω: 300W
- 4Ω: 600W
- 8Ω: 600W
- 16Ω: 300W
- 70V: 600W
- 100V: 600W
- Bridge Mono – All Channels Driven
- 4Ω: 600W
- 8Ω: 1200W
- 16Ω: 1200W
- 140V: 1200W
- 200V: 1200W
Sourcing Our Professional Products
Sound Technology’s professional audio products are specified and supplied by leading resellers and integrators throughout the country, together with a select number of trade distributors.
Trade Customers
If you are a trade customer please call Sound Technology Ltd on +44(0)1462 480000 for more information or call one of our sub-distributors listed below.
Trade Sub-distributors
Crown DCi4|300DA
Four-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V
RRP ex VAT: £3,990.00
SKU: CRO0350
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for…
View details
Crown DCi4|600DA
Four-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V
RRP ex VAT: £5,560.00
SKU: CRO0349
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for…
View details
Crown DCi8|300DA
Eight-channel, 300W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
RRP ex VAT: £7,195.00
SKU: CRO0334
Eight-channel, 300W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V…
View details
Crown DCi4|1250DA
Four-channel, 1250W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
RRP ex VAT: £7,325.00
SKU: CRO0336
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.…
View details