ASB6112

Compact High Power Single 12

SRP £2,305.00 + VAT

The ASB6112 is a high power,
lightweight front-loaded vented
subwoofer enclosure housing JBL's
2263H Differential Driver dual coil dual
gap 12" woofer. This woofer features
neodymium magnet and ultra robust
cone for extra long life.

  • 2263H 12" Differential Drive® dual
  • voice coil dual gap, neodymium magnet transducer
  • 1000 watts continuous pink noise,
  • 4000 watts peak power handling capacity
  • Large vent area for high output with
  • low distortion
  • For ground-stacked or suspended
  • applications in stand-alone arrays or in
  • combination with other
    AE Series
  • products
Frequency Range (-10 dB)35 Hz - 1 kHz
Frequency Response (± 3 dB)43 Hz - 1 kHz
Transducer Power Rating1000 W (4000 W peak), 2 hrs.
Long-Term System Power Rating700 W (2800 W peak), 100 hrs.
Maximum SPL (1m)40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak)
System Sensitivity40 Hz - 300 Hz: 96 dB-SPL,1W (2.83V) @ 1m
Nominal Impedance8 ohms
Low Frequency Driver1 x 2263H, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
EnclosureRectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
FinishBlack DuraFlex™ finish.White available upon request.
GrillePowder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input ConnectorNL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental SpecificationsMil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D invertical cabinet orientation)406 x 369 x 483 mm(16.0 x 14.5 x 19.0 in)
Net Weight16.3 kg (36.0 lb)
Optional AccessoriesM10 x 35 mm forged shoulder eyebolts with washers.