ASB6115

High Power Single 15

SRP £2,605.00 + VAT

The ASB6115 is a high power,
lightweight front-loaded vented
subwoofer enclosure housing JBL's
2265H-1 Differential Driver dual voice
coil dual gap 15" woofer. This woofer
features neodymium magnet and ultra
robust cone for extra long life.

  • 800 watts continuous pink noise,
  • 3200 watts peak power handling
  • capacity
  • Large vent area for high output with
  • low distortion
  • For ground-stacked or suspended
  • applications in stand-alone arrays or in
  • combination with other
    AE Series
  • products
  • 2265H-1 15" Differential Drive® dual
  • voice coil dual gap, neodymium
  • magnet transducer
Frequency Range (-10 dB)32 Hz - 1 kHz
Frequency Response (± 3 dB)42 Hz - 1 kHz
Transducer Power Rating800 W (3200 W peak), 2 hrs.
Long-Term System Power Rating675 W (2700 W peak), 100 hrs.
Maximum SPL (1m)35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak)
System Sensitivity35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m
Nominal Impedance8 ohms
Low Frequency Driver1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
EnclosureRectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
FinishBlack DuraFlex™ finish. White available upon request.
GrillePowder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input ConnectorNL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental SpecificationsMil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D invertical cabinet orientation)483 x 419 x 597 mm(19.0 x 16.5 x 23.5 in)
Net Weight20.6 kg (45.5 lb)
Optional AccessoriesM10 x 35 mm forged shoulder eyebolts with washers.