Martin MAC Viper Wash

Overview

The MAC Viper Wash is a full-range wash luminaire capable of performing at the high level you would expect from a professional wash light.

It features an outstanding quality of light with unlimited colour choices and excellent colour stability across the entire beam. It maintains near full efficiency throughout the entire zoom range with no visible beam jump when zooming from tight to wide. The MAC Viper Wash has adopted the compact form, impressive speed, superior light quality and beautiful colours that the MAC Viper Profile is renowned for and uses the same 1000-watt lamp.

33000 Lumens – Excellent light quality with a uniform field and 6000K colour temperature
1:5 zoom - Continuous and fast
CMY – Vibrant colour mixing with a superior palette of colours including true reds, rich ambers, primary green and deep blues

Key Features

33000 Lumens – Excellent light quality with a uniform field and 6000K colour temperature
1:5 zoom - Continuous and fast
CMY – Vibrant colour mixing with a superior palette of colours including true reds, rich ambers, primary green and deep blues
Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette
Dimmer and shutter - Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades
Diverse strobe effects

Specifications

Physical
Length (base)	472 mm (18.6 in.)
Length (head)	566 mm (22.3 in.)
Width	473 mm (18.6 in.)
Width (base)	335 mm (13.2 in.)
Height (head straight up)	732 mm (28.8 in.)
Height (maximum)	749 mm (29.5 in.)
Weight	33 kg (72.8 lbs.)
Minimum center-to-center distance in side-by-side installation	650 mm (25.6 in.)
Dynamic Effects
Colour mixing	CMY, independently variable 0 - 100%
Colour temperature control	CTO, variable 6000 - 3200 K \
Mechanical dimmer/shutter	0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
Dimming options	Choice of four dimming curves
Focus	Range varies with zoom angle, from 2 m / 6 m to infinity (approx.)
Zoom	Motorised
Pan	540°
Tilt	268°
Position correction system	Absolute position monitoring
Control and Programming
DMX channels	18/24
Setting and addressing	Control panel with backlit graphic display and jog wheel or via DMX
16-bit control	Dimmer, pan, tilt
DMX compliance	USITT DMX512-A
RDM compliance	ANSI/ESTA E1.20
Receiver	Opto-isolated RS-485
Firmware update	USB memory device or USB/DMX hardware interface over DMX link
Lamp
Type	1000 W short-arc discharge
Colour temperature	6000 K
CRI (Colour rendering index)	>85
Average lifetime	750 hours
Socket	PGJX36
Ballast	Electronic
Approved lamps	Osram Lok-it! 1000/PS Brilliant, Osram Lok-it! 1000W/PS VS1, Philips MSR Gold MiniFastFit 1000W
Optics
Zoom range	13.5° - 59° (1:5)
Output	33 000 lm
Service Utilities
Fixture identification	User-settable fixture ID number
Construction
Colour(s)	Black
Housing	UV-resistant fiber-reinforced composite
Reflector	Glass, cold light Protection rating: IP20
Installation
Mounting points	Eight quarter-turn locking points
Orientation	Any Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.)
Minimum distance to combustible materials	0.3 m (1.0 ft.)
Connections
AC power input	Neutrik PowerCon
DMX and RDM data in/out	5-pin locking XLR
USB memory devices	USB host socket
Electrical
AC power	120-240 V nominal, 50/60 Hz
Power supply unit	Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current	16.2 A
Typical Power and Current
120 V, 60 Hz	1225 W, 10.3 A, PF 0.999
208 V, 60 Hz	1190 W, 5.8 A, PF 0.996
230 V, 50 Hz	1186 W, 5.2 A, PF 0.994
240 V, 50 Hz	1194 W, 5.0 A, PF 0.993
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
PF = power factor
Thermal
Cooling	Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.)	40° C (104° F)
Minimum ambient temperature (Ta min.)	5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient	150° C (302° F)
Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz)	4180 BTU/hr
Approvals
EU safety	EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC	EN 55015, EN 55103-1, EN 55103-2, EN 61547
US safety (pending)	UL 1573 US EMC: FCC Part 15 Class A
Canadian safety (pending)	CSA E598-2-17 (CSA E60598-1)
Canadian EMC	ICES-003 Class A
Australia/NZ	C-TICK N4241